ADTRAN XR Quick Start Manual page 70

Appendix A. AT Commands and S-Registers
S14 ... MISC BITS ......... Miscellaneous bits (bit 8 is most significant bit).
S15 ... ASYNC ................ Asynchronous BONDING method.
BONDING
S22 ... MSG BITS .......... Miscellaneous message bits (bit 8 is most
S25 ... DTR DETECT .... Determines time, in hundredths of a second, that
TIME
S27 ... PPP MODE ......... Value determines whether or not PPP will be a
S30 ... DTE CTS ............. Controls the operation of the DTE connector
S31 ... DTE RTS ............. Controls operation of the RTS line.
5 8
execute the command.
Range = 0 to 127
Bit 2 = 1: Enables on screen echo of AT commands.
Bit 2 = 0: Disables on screen echo of AT
commands.
Bit 3 = 0: Enables AT responses from the
Express XR/XRT.
Bit 3 = 1: Disables AT responses from the
Express XR/XRT.
Bit 4 = 1: Enables AT responses to be displayed
in text form.
Bit 4 = 0: Enables AT responses to be displayed
in numeric form.
Bit 7 = 1: Disable PPP ACCM spoofing.
Bit 7 = 0: Enable PPP ACCM spoofing.
Bit 8 = 1: Ring indicator uses cadence.
Bit 8 = 0: Ring indicator remains on.
0 = ADTRAN revision 0 (default)
1 = Multi-vender option
significant bit).
Bit 5 = Bit 6 = Bit 7 = 1 Allows connect mes-
Bit 5 = Bit 6 = Bit 7 = 0 Connect message
must elapse before the Express XR/XRT recog-
nizes a change in DTR.
Range = 0 to 255
single-link or multilink connection.
0 = Single-link operation (default)
1 = Multilink operation
2 = Use compression
CTS line.
0 = Follows RTS
1 = Force CTS
Express XR/XRT Quick Start Guide
sage with baud rate.
without baud rate.
61200.153L1-13