Carrier Super-Slim 18-24 Installation Manual page 32

Hang the intake grille on the panel, and then
connect the lead connectors of the louver motor and
the control box on the panel to the corresponding
connectors of the main body.
Install cover rope
Panel hook
Re-installed into the style grid.
Reinstall the installation cover.
Fix the installation cover plate rope to the pillar of
the installation cover plate, and gently press the
installation cover plate into the panel.
NOTE: After installation, the butt plugs of display,
swing, water pump and other wire bodies must
be placed in the electric control box.
Page 31-GB
Bolt
When installing the cover, slide
the four slide fasteners into
the corresponding slots on the
panel.