Using the Oscilloscope
To set dialog box preferences
• To allow multiple dialog boxes on the screen at a time, select Utilities > User
Preferences. Then select Allow Multiple Active Dialogs in the User Preferences
dialog box. You can also right-click in most open dialog boxes and check the
Multiple Active Dialogs selection.
Normally, the oscilloscope displays only one dialog box at a time, and you must
close that dialog box before opening another. With Allow Multiple Active
Dialogs, you can change several different aspects of the oscilloscope
configuration simultaneously.
Figure 3-28
Setting Dialog Box Options
86
Select this command to
allow many dialog
boxes to be on the
screen at one time