Video (If) Trigger Delay; Video (If) Trigger Level - Agilent Technologies E4406A VSA Series Programmer's Manual

Video (IF) Trigger Delay

:TRIGger[:SEQuence]:IF:DELay <time>
:TRIGger[:SEQuence]:IF:DELay?
Set the trigger delay when using the IF (video) trigger (after the
Resolution BW filter).
Factory Preset
and *RST: 0 s
−500 ms to 500 ms
Range:
−100 ms to 500 ms for cdma2000, W-CDMA
Default Unit: seconds
Front Panel
Access:
Mode Setup, Trigger, Video (IF Envlp), Delay

Video (IF) Trigger Level

:TRIGger[:SEQuence]:IF:LEVel <power>
:TRIGger[:SEQuence]:IF:LEVel?
Set the trigger level when using the IF (video) trigger.
Factory Preset
−6.0 dBm for cdmaOne, GSM, Basic, Service,
and *RST:
cdma2000, W-CDMA modes
−20.0 dBm for iDEN
−30.0 dBm for NADC, PDC
−200 to 50 dBm
Range:
Default Unit: dBm
Front Panel
Access:
Mode Setup, Trigger, Video (IF Envlp), Level
Chapter 5
Language Reference
TRIGger Subsystem
293