Advertisement
Turning on/off the system
1. Turn on computer
2. Power on A1 controller and laser
power supply.
3. Turn the key and select the
needed lasers by pressing the
buttons.
4. Turn on stage power supply and
DIA lamp if bright field is needed
5. Power on microscope, wait until
startup sequence is finished.
6. Log in with your LBIC account
and start NIS-Elements AR
7. Turn off system in reverse order
Laser
Laser
on/off
buttons
key
A1 controller
Brightfield lamp power
4
Motorized stage
power
(2)
Advertisement
