Safety Information - Brother HL-3400CN Series User Manual

USER'S GUIDE

Safety Information

IMPORTANT - For Your Safety
To ensure safe operation the three-pin plug supplied must be inserted only into a
standard three-pin power point that is effectively grounded through the normal
household wiring.
Any extension cords used with this printer must be three-conductor and be correctly
wired to provide connection to ground. Improper extension cords are a major cause
of fatalities.
The fact that the equipment operates satisfactorily does not imply that the power is
grounded and that the installation is completely safe. For your safety, if in any
doubt about the effective grounding of the power, consult a qualified electrician.
Disconnect device
This printer must be installed near a power outlet that is easily accessible. In case of
emergencies, you must disconnect the power cord from the power outlet to shut off
the power completely.
Geräuschemission / Acoustic Noise Emission (For
Germany Only)
Lpa < 70 dB (A) DIN 45635-19-01-KL2
Wiring Information (For U.K. only)
If the power cord supplied with this printer is not suitable for your electrical outlet,
remove the plug from the mains cord and fit an appropriate three pin plug. If the
replacement plug is intended to take a fuse then fit a fuse with the same rating as
the original.
If a moulded plug is severed from the power cord then it should be destroyed
because a plug with cut wires is dangerous if plugged into a live socket outlet. Do
not leave it where a child might find it.
In the event of replacing the plug fuse, fit a fuse approved by ASTA to BS1362
with the same rating as the original fuse.
Always replace the fuse cover. Never use a plug with the cover omitted.
WARNING - THIS PRINTER MUST BE PROPERLY EARTHED.
xvi
Important