Brother HL-3400CN Series User Manual page 126

Notes
When you select the optional fonts or permanent download fonts, note the
following:
If the optional font card is not installed, the optional font cannot be
selected. No selection appears on the display.
If permanent fonts are not downloaded in the HP emulation mode or
another emulation mode is selected, the permanent fonts cannot be
selected. No selection appears on the display.
When you select the optional font or download font, press the Set
button to enter the sub-menu. After you select your desired font with
button, press the Set button again. The list you can print
the or
with the Test button helps you to select the optional fonts or
permanent download fonts. See
"Selecting the Optional Fonts"
4. Press the Set button.
When you enter the font setting mode, the display first shows
the current font with an asterisk.
5. Press the or
display.
See "List of Fonts".
6. Press the Set button to make the displayed selection effective.
The steps you follow will vary according to the font type,
scalable or bitmapped.
If you select a resident bitmapped font (Letter Gothic 16.66) or
optional bitmapped fonts, the display shows the character set
selection menu.
Go to step 7.
If you select the resident scalable fonts or optional scalable
fonts, the display shows the font style selection menu and then
changes to the font size menu.
7. Press the or
display.
Display Message
Lt
Reg
Bd
Xb
It
"TEST button" in this chapter or
in Chapter 5.
button until the font you want appears on the
button until the desired style appears on the
Font Style
Light
Regular, Roman, Book, or
Antique
Bold or Demi
Extrabold
Italic or Oblique
CHAPTER 4 CONTROL PANEL
4–55