Turning the Printer On
Installing the Power Cord and Turning the Printer On
1.
2.
3. Turn the printer ON by pressing the Power Button.
!
Caution
Check the AC voltage. This printer should be operated at the specified
voltage and frequency.
Since this printer must be electrically grounded, the power cord
should be connected to a grounded AC outlet.
The total length of the power cord, including extension cords, should
not exceed 5 metres (16.4 feet). Use of a longer power cord may result
in reduced voltage or malfunctions.
Do not unplug the power cord to turn off the printer.
The printer should be installed near a power outlet that is easily
accessible.
Make sure that the Power button is turned OFF. The power
button is on the front left side of the printer.
Attach the power cord to the printer and plug it into an
appropriate AC outlet.
Fig. 2-25 Plugging in the Power Cord
• USA and Canada:
• Europe, Australia and others:
CHAPTER 2 SETTING UP THE PRINTER
AC 120 V, 50/60 Hz
AC 220 to 240 V, 50/60 Hz
2–19