Brother HL-3400CN Series User Manual page 220

USER'S GUIDE
Operator Call Message
XX LOAD PAPER
***** SIZE
T1 MANUAL FEED
***** SIZE
19 CHECK FONT
20 FONT REMOVAL
22 WASTE TONER
23 OIL EMPTY
24 CHANGE FCR
25 NO FUSER UNIT
27 NO OPC BELT
28 NO FC ROLLER
13 JAM DPX1
13 JAM DPX2
DX MEDIA ERROR
29 NO LFU
30 NO TR ROLLER
31 ILLEGAL TONER
40 STACKER FULL
6–2
Meaning
The wrong size of paper was
loaded in the Media Cassette.
XX is T1/ T2/ T3.
The printer is requesting you
to load paper manually.
An error occurred in the
optional font card.
The PCMCIA card was
removed while the printer is
on-line.
The Waste Toner Pack is full. Replace the Waste Toner Pack with a
The Oil in the Oil Bottle is
empty.
It is time to replace the Fuser
Cleaner.
The Fusing Unit is not
installed correctly.
The OPC Belt Cartridge is not
installed correctly.
The Cleaning Roller is not
installed correctly.
Paper jam has occurred in the
Duplex Cover Top Assembly.
Paper jam has occurred in the
Cover Assembly of the
Duplex Unit.
Paper which does not meet the
specification is loaded.
The Lower Tray Unit is not
installed when the Duplex
Unit is installed.
The Transfer Roller is not
installed.
The printer detects the toner
installed is not Brother
original.
Out put stacker is full.
Action
Load the requested size of paper in
the Media Cassette and press the
Form Feed button.
Load the requested size of paper on
the Standard Media Cassette and
press the Sel button.
Turn off the printer, and re-install or
replace the optional font card.
Turn off the printer, install the card,
and turn on the printer. The
Continue button will allow you to
temporarily ignore this message.
new one.
Replace the Oil Bottle with a new
one.
Replace the Fuser Cleaner with a
new one.
Install the Fusing Unit correctly.
Install the OPC Belt Cartridge
correctly.
Install the Cleaning Roller correctly.
Remove the jammed paper from the
Duplex Unit. See Chapter 5
to remove the jammed paper from
the Duplex Unit.
Remove the jammed paper from the
Duplex Unit. See Chapter 5
to remove the jammed paper from
the Duplex Unit.
Load paper which meet the
specification.
Install the Lower Tray Unit.
Install the Transfer Roller.
Install the Brother original toner
cartridge.
Remove the paper from the out put
stacker.
for how
for how