Operation Notice
10
Operation Notice
10.1 Accessibility and Voice Quality
The handset can only be used in the area covered by the system. If the handset has no coverage, it
shows No network in the handset display in Idle mode. It also gives a vibrating alert (if enabled), a
beep signal (if enabled), and displays a dialog window (if enabled by the system administrator).
The indication is by default repeated every minute for 30 minutes.
It is possible to configure if the dialog window No network is visible or not on the handset
display. For the details, please refer to the Mitel 5634 VoWi-Fi Handset Configuration Guide.
Indication frequency can also be changed to indicate only once or can be turned off completely.
For the details, please refer to the Mitel 5634 VoWi-Fi Handset Configuration Guide.
When re-entering the coverage area, it can take a couple of minutes before the handset is
automatically registered with the system.
The WLAN network is not always available, but if you continue experiencing network problems,
contact your system administrator as soon as possible.
52
USER GUIDE
Mitel 5634 VoWi-Fi Handset
Mitel 5634 VoWi-Fi Handset
58016275 / October 2020