List Of Factory Settings - Brother HL-2060 User Manual

USER'S GUIDE
Switch Item
MODE
INTERFACE MODE
FORMAT MODE
4–84

List of Factory Settings

The following table shows the factory settings initially set before shipment.
Note
The settings are subject to the emulation mode. Effective modes are
indicated in parentheses in the following table.
The following settings cannot be restored to the factory settings with
the RESET switch in the "FACTORY SETTINGS" mode:
INTERFACE MODE, HRC SETTING, PAGE PROTECTION,
SCALABLE FONT, LOCK PANEL, and PAGE COUNTER, and local
language for display messages.
The COPY setting is always restored to the factory setting when the
printer is turned off and on again.
The user settings are overwritten after resetting to setting 1 or 2.
Sub-Item
–
For AUTO mode
TIME OUT
For bi-directional PARALLEL interface
HIGH SPEED
BI-DIR
For RS-232C serial interface
Baud Rate
Code Type
Parity
Stop Bit
Xon/Xoff
DTR (ER)
Robust Xon
ORIENTATION (Except for BR-
Script 2)
AUTO MODE (HP LaserJet)
AUTO LF
AUTO CR
AUTO WRAP
AUTO SKIP
AUTO MODE (EPSON)
AUTO LF
Factory Setting
I/F=AUTO
TIME OUT= 5s
HIGH SPEED=ON
BI-DIR=ON
BaudRate= 9600
CodeType=8 bits
Parity =NONE
Stop Bit= 1 bits
Xon/Xoff=ON
DTR (ER)=ON
Robust Xon=OFF
ORI=PORTRAIT
OFF
OFF
OFF
ON
OFF