Brother HL-2060 User Manual page 114

Execute Data
Note
This menu appears only when data has been saved on the card.
When you select "EXECUTE DATA," you can execute any of the data
saved in the SAVE DATA mode.
When you enter this sub-setting menu with the SET switch, the printer
prompts you to select the ID of the data.
DATA ID=#####
Select the ID with the
that the printer executes the selected data.
Card List
When you select "CARD LIST" and you press the SET switch, the printer
automatically loads paper and starts printing the contents of the installed
flash memory card or HDD card. You can check the contents and the
unused capacity of the card.
Save
When you select "SAVE" and you press the SET switch, you can enter
the following sub-setting menus to save the macros and fonts in the
installed card:
Display Message
SAVE DATA
SAVE MACRO
PRIMARY FONT
SECONDARY FONT
DOWNLOAD FONT
or switch and press the SET switch again, so
Save Menu
Save data that the printer will receive and
set its ID.
Save a macro. This menu appears only in
the HP LaserJet emulation mode.
Save the primary font selected with the
FONT switch. This menu appears only in
the HP LaserJet emulation mode.
Save the secondary font selected with the
FONT switch. This menu appears only in
the HP LaserJet emulation mode.
Save a download font. This menu appears
only in the HP LaserJet emulation mode.
CHAPTER 4 CONTROL PANEL
4–39