Brother HL-2060 User Manual page 130

5. Press the SET switch.
When you enter the "SELECT FONT" menu, you can select the
internal font, optional slot font, or permanent download font. The
display shows the following message.
INTERNAL FONT p*
Press the or switch until the desired font source appears on the
display.
Display Message
INTERNAL FONT
CARD1 FONT
CARD2 FONT
PERMANENT FONT
Since these steps instruct you to select the standard font, select the
"INTERNAL FONT" message.
Note
When you select the optional fonts or permanent download fonts, note the
following:
If the optional font card is not installed, the optional font cannot be
selected. No selection appears on the display.
If permanent fonts are not downloaded in the HP emulation mode or
another emulation mode is selected, they cannot be selected. No
selection appears on the display.
The list you can print out with the TEST switch helps you to select the
optional fonts or permanent download fonts.
this chapter or "Selecting the Optional Fonts" in Chapter 5.
6. Press the SET switch.
When you enter the font setting mode, the display first shows the
current font with an asterisk.
BROUGHAM
7. Press the or switch until the desired font appears on the display.
CHAPTER 4 CONTROL PANEL
Font Source
Internal font of the printer
Optional font card in slot 1
Optional font card in slot 2
Permanent download font defined
in the HP emulation mode
See "TEST switch" in
p*
4–55