Brother HL-2060 User Manual page 192

English
USER'S GUIDE
Operator Call Message
18 MANUAL FEED
***** SIZE
19 CHECK FONT
20 FONT REMOVAL
27 NO DX UNIT
27 NO DX TRAY
27 DX OPEN
STACK FULL
7–2
Meaning
The printer requests you to
load paper manually. (The
message appears alternately to
show a particular size.)
An error occurred in the
optional font card.
The font card was removed
while the printer is on-line.
The duplex unit is not
installed with the printer when
the duplex printing mode is
selected.
The duplex paper guide tray is
not installed in T1 when
duplex printing mode is
selected.
The cover of the duplex unit is
open.
There is too much paper in the
print delivery tray.
Action
Load the requested size of
paper on the multi-purpose
tray and press the SEL switch.
Turn off the printer, and re-
install or replace the optional
font card.
Turn off the printer, install the
font card, and turn on the
printer. The CONTINUE
switch will allow you to
temporarily ignore this
message.
Install the duplex unit
correctly. See the DX-
2000/DX-1600 user's guide.
Install the duplex paper guide
tray into T1. See the DX-
2000/DX-1600 user's guide.
Close the cover. See the DX-
2000/DX-1600 user's guide.
Remove the paper from the
print delivery tray.