Startup
Startup
1.
Place displacement pump in grounded
metal pail partially filled with flushing
fluid. Attach ground wire to pail and to
earth ground.
2.
Turn prime valve down. Turn pressure
control counterclockwise to lowest
pressure.
3.
Set hydraulic pump valve OFF.
12
ti9692a
ti9686a
4.
Plug cord into outlet.
5.
Turn motor ON.
6.
Set hydraulic pump valve ON (hydraulic
motor is now active).
7.
Increase pressure enough to start
hydraulic motor stroking and allow fluid
to circulate for 15 seconds; turn pressure
down, turn prime valve horizontal.
15
SEC
ti29582a
ti9687a
3A4401A