For Network Users; Web Based Management; Web Browser - Brother MFC-9560CDW Quick Setup Manual

For Network Users

Web Based Management

(web browser)

The Brother print server is equipped with a web server
that allows you to monitor its status or change some
of its configuration settings, using HTTP (Hyper Text
Transfer Protocol).
Note
• The default User Name is 'admin' and the
default password is 'access'. You can use a
web browser to change this password.
• We recommend Microsoft
®
Explorer 6.0 (or greater) or Firefox 3.0 (or
®
greater) for Windows
greater) for Macintosh. Please also make sure
that JavaScript and cookies are always enabled
in whichever browser you use. To use a web
browser, you will need to know the IP address
of the print server. The IP address of the print
server is listed on the Network Configuration
List.
a
Open your browser.
b
Type http://machine_ip_address/ into
your browser (where machine_ip_address
is the IP address of the printer or the print
server name).
 For example: http://192.168.1.2/
See Web Based Management in the Network
User's Guide.
®
Internet
and Safari 3.0 (or
Print the Network Configuration
List
You can print the Network Configuration List to
confirm the current network settings.
a
Turn on the machine and wait until the machine
is in the Ready state.
b
Press Menu, 6, 6.
c
Press Black Start or Color Start.
The machine will print the current network
settings.
d
Press Stop/Exit.
Restore the network settings to
factory default
To restore all network settings of the internal
Print/Scan server to factory default, please follow the
steps below.
a
Make sure the machine is not operating, then
disconnect all the cables from the machine
(except the power cord).
b
Press Menu, 7, 0.
c
Press 1 to choose Reset.
d
Press 1 to choose Yes.
The machine will restart, re-connect cables
once this is complete.
35