Retrieve A Fax; Check The Receiving Status; Change Answer Mode; Exit Remote Operation - Brother FAX-8250P Owner's Manual

82
C H A P T E R N I N E
Program Fax Forward Number––Press 4. Automatically, the machine
will turn Fax Forwarding ON.
Turn Fax Storage ON––Press 6.
Turn Fax Storage OFF––Press 7. Only possible if there are no faxes in
memory or all faxes have been erased (by using Remote Control
9 6 3).

Retrieve a Fax

Press 9 6
then to
Print a Memory Status List––Press 1, then enter the number of remote
fax machine and the # #. After the beep, hang up and wait.
Retrieve all faxes––Press 2, then enter the number of remote fax
machine and the # #. After the beep, hang up and wait.
Erase all fax messages––Press 3. If the fax data in memory has not been
printed before, it will be printed first, and then erased.

Check the Receiving Status

Press 9 7
then for
Fax messages––Press 1.
1 long beep––Received messages.
3 short beeps––No messages.

Change Answer Mode

Press 9 8
then for
TAD––Press 1.
Fax/Tel (F/T)––Press 2.
Fax––Press 3.

Exit Remote Operation

Press 9 0