Brother MFC-640CW Quick Setup Manual page 27

Installing the Driver & Software
10
Carefully guide the USB cable into the trench
as shown below, following the trench around
and toward the back of the machine.
Improper Setup
• DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
Brother recommends that you connect the
machine directly to your computer.
• Make sure that the cable does not restrict the
cover from closing, or an error may occur.
11
Lift the scanner cover to release the lock.
Gently push the scanner cover support down
and close the scanner cover.
12
Turn on the machine by plugging in the power
cord.
13
Choose USB and then click OK.
14
Click GO, then Applications.
15
Double-click the Utilities folder.
16
Double-click the Printer Setup Utility icon.
Note
®
For Mac OS X 10.2.x users, open Print Center
icon.
17
Click Add.
18
Choose USB. (For Mac
users)
Note
®
OS X 10.4 users, go to step 19.
For Mac
Macintosh
®
OS X 10.2.4 to 10.3
25
®