Initial Setup; Getting Started; Setting Paper Type; Setting Paper Size - Brother MFC-5100C Owner's Manual

4

Initial Setup

4

Getting Started

Setting Paper Type

You can choose the Paper Type you use.
1
Press Menu/Set, 1, 1.
2
Press select PLAIN,
or
GLOSSY or
3
If you selected GLOSSY, press
GLOSSY:3-COLOR, and then press Menu/Set.
The print quality of black ink varies depending on the kind of glossy paper you
Note
are using. Black ink is used when you select
glossy paper you are using repels the black ink, select GLOSSY:3-COLOR,
which simulates black ink by combining the three ink colors.
4
Press Stop/Exit.
The MFC ejects paper with printed surfaces face up onto the paper tray in the
Note
front of the MFC. When you use transparencies, remove each sheet
immediately to prevent a paper jam or curled.

Setting Paper Size

You can use three sizes of paper for printing your faxes and copies — letter,
legal and A4. When you change the kind of paper you have loaded in the MFC,
you will need to change the setting for Paper Size so your MFC can fit the
incoming fax on the page.
1
Press Menu/Set, 1, 2.
2
Press to select LETTER,
or
or A4, and then press Menu/Set.
3
Press Stop/Exit.
INK JET,
(TRANSPARENCY), and then press Menu/Set.
TRNSPRNCY
LEGAL
to select GLOSSY:4-COLOR
or
GLOSSY:4-COLOR.
I N I T I A L S E T U P
or
If the
4 - 1