Setting The Beeper Volume; Turning On Automatic Daylight Savings Time; Setting Tone/Pulse Dialing Mode (For Canada Only); Memory Storage - Brother MFC-5100C Owner's Manual

Setting the Beeper Volume

You can set the beeper to LOW,
When the beeper is set to
a key or make an error and when fax sending or receiving is finished.
1
Press Menu/Set, 1, 5, 2.
2
Press or to select your option.
3
When the LCD shows the option you want, press Menu/Set.
Press Stop/Exit.

Turning On Automatic Daylight Savings Time

You can set the machine to change automatically for Daylight Savings Time. It
will reset itself forward one hour in the Spring and backward one hour in the
Fall.
1
Press Menu/Set, 1, 6.
2
Press to select
or
and then press Menu/Set.
3
Press Stop/Exit.

Setting Tone/Pulse Dialing Mode (For Canada Only)

Your MFC comes set to accommodate tone dialing service
(multi-frequency). If you have pulse dialing service (rotary), you need to
change the dialing mode.
1
Press Menu/Set, 1, 7.
2
or
Press to select
and then press Menu/Set.
3
Press Stop/Exit.

Memory Storage

In the event of a power failure, all settings in the
RECEIVE, SET AUTO DIAL
permanently. You may have to reset the date and time.
HIGH
LOW or HIGH, the MFC beeps every time you press
ON (or OFF),
PULSE (or TONE),
and REMOTE FAX OPT
or OFF. The default setting is LOW.
GENERAL
I N I T I A L S E T U P
SETUP, SETUP
are stored
4 - 5