4
Initial Setup
Setting the Date and Time
Your MFC displays the date and time and if you set up the Station ID
it prints on every fax you send. If there is a power failure, you may
have to reset the date and time. All other settings will not be affected.
1
Press
2
Enter the last two digits of the year.
Press
3
Enter two digits for the month.
Press
(For example, enter 09 for September, or 10 for October.)
4
Enter two digits for the day.
Press
(For example, enter 06 for 6th.)
5
Enter the time in 24-Hour format.
Press
(For example, enter 15:25 for 3:25 P.M.)
6
Press
whenever the MFC is in Standby mode.
Downloaded from ManualsPrinter.com Manuals
Getting started
Menu
0
2
,
,
.
Set
.
Set
.
Set
.
Set
.
Stop/Exit
. The LCD now shows the date and time
02.Date/Time
Year:20XX
Enter & Set Key
GETTING STARTED 4 - 1