Setup Send; Before You Begin; Sending Faxes Using Multiple Settings; Faxing From The Adf (Automatic Document Feeder) - Brother MFC-5100C Owner's Manual

6

Setup Send

6

Before You Begin

You can send a fax from the ADF (Automatic Document Feeder) or from the
scanner glass.

Sending Faxes Using Multiple Settings

When you send a fax you can choose any
combination of these settings: set the
contrast or resolution; send using
overseas mode, delayed fax timer,
polling transmission or real time
transmission. After each menu selection is accepted, the LCD will ask if you
want to enter other settings:
Press 1 if you want to select additional settings. The LCD returns to the SETUP
SEND menu—OR—Press 2 if you are finished choosing settings, and then go
to the next step.

Faxing from the ADF (Automatic Document Feeder)

The ADF can hold up to 30 pages, feeding each one individually through the
MFC. Use standard (20 lb/75g/m
the pages well first.

Recommended Environment

Temperature:
Humidity:
Paper:
DO NOT use curled, wrinkled, folded, ripped paper, or paper with staples, paper
clips, paste or tape attached. DO NOT use cardboard, newspaper or fabric. (To
fax this kind of original, see
I
Make sure documents written with ink are completely dry.
I
Originals to be faxed must be from 5.8 to 8.5 inches wide and 5.8 to 14 inches
long.
2
) paper when using the ADF and always fan
68°F – 86°F (20°C – 30°C)
50% – 70%
Xerox 4200 (20LB/LTR)
Faxing from the Scanner Glass
, page 6-3.)
S E T U P S E N D
6 - 1