Quality; Media - Brother MFC 7150C Owner's Manual

154
C H A P T E R S E V E N T E E N

Quality

Select the print quality. The print quality and speed are related. Higher
quality takes a longer time to print.
Draft : 360 x 180 dpi. The fastest print mode (approximately two to
four times faster than normal mode) and gives lower ink
consumption. Use this mode to print large volume documents
or a document for proofing.
Normal : 360 x 360 dpi. Recommended mode for ordinary printouts.
Good print quality with comfortable printing speed.
Fine : 720 x 720 dpi. Better print quality than normal and faster
print speed than Super Fine.
Super Fine : 1440 x 720 dpi. Use this mode to print precise images such as
photographs. Since the print data is much larger than normal
mode, processing time, data transfer time, and printing time
will be longer.

Media

Select the media (type of paper). The MFC changes the way it places dots
depending on the selected media type. To get good print output, make sure
to select the correct media type.
Selecting media type changes the print quality selection to the most suitable
one as listed below. We recommend that you print with the preset quality for
best printing result.
Paper Type
Plain Paper
Coated(360) Paper
Coated(720) Paper
Glossy Paper
Transparency
Transparency (mirror)
Use only genuine Brother Coated Paper (Ink Jet), Glossy Paper, or
Transparencies to get the best print quality. Non-Brother special paper may
not produce the best quality.
Suitable print quality
Normal
Normal
Fine
Super Fine
Normal
Normal