Table of Contents
Advertisement
20
C H A P T E R T W O
RJ14
RJ11
RJ14
Converting Telephone Wall Outlets
There are three ways to convert to an RJ11 jack. The first two ways may
require assistance from the telephone company. You can change the wall
outlets from one RJ14 jack to two RJ11 jacks. Or, you can have an RJ11
wall outlet installed and slave or jump one of the phone numbers to it.
The third way is the easiest: Buy a triplex adapter. You can plug a triplex
adapter into an RJ14 outlet. It separates the wires into two separate RJ11
jacks (Line 1, Line 2) and a third RJ14 jack (Lines 1 and 2). Plug the MFC
into Line 2 of the triplex adapter.
Installing MFC, External Two-Line TAD, and Two-Line Telephone
When you are installing an external two-line telephone answering device
(TAD) and a two-line telephone, your MFC must be isolated on one line at
both the wall jack and at the TAD. The most common connection is to put
the MFC on Line 2. The two-line TAD must have two telephone jacks: one
labeled L1 or L1/L2, and the other labeled L2. You will need at least three
telephone line cords, the one that came with your MFC and two for your
external two-line TAD. You will need a fourth line cord if you add a
two-line telephone.
1
Place the two-line TAD and the two-line telephone next to your MFC.
2
Plug one end of the telephone line cord for your MFC into the L2 jack
of the triplex adapter. Plug the other end into the LINE jack on the back
side of the MFC.
3
Plug one end of the first telephone line cord for your TAD into the L1
jack of the triplex adapter. Plug the other end into the L1 or L1/L2 jack
of the two-line TAD.
4
Plug one end of the second telephone line cord for your TAD into the
L2 jack of the two-line TAD. Plug the other end into the EXT. jack on
the back side of the MFC.
Triplex Adapter
Advertisement
Table of Contents
