Setting Tone Or Pulse Dialling Mode; Setting The Telephone Line Type - Brother MFC-235C Quick Setup Manual

STEP 1
Setting Up the Machine
9 Setting tone or pulse dialling
mode
Your machine comes set for a Tone dialling service. If
you have a Pulse dialling service (rotary), you need to
change the dialling mode.
1
Press Menu.
2
Press 0.
3
Press 4.
4
Press a or b to choose Pulse (or Tone).
Press OK.
5
Press Stop/Exit.
12
10 Setting the telephone line
type
If you are connecting the machine to a line that
features PBX or ISDN to send and receive faxes, it is
necessary to change the telephone line type
accordingly by completing the following steps.
1
Press Menu.
2
Press 0.
3
Press 6.
4
Press a or b to choose PBX, ISDN (or Normal).
Press OK.
5
Press Stop/Exit.
PBX and TRANSFER
The machine is initially set to Normal, which lets the
machine connect to a standard PSTN (Public
Switched Telephone Network) line. However, many
offices use a central telephone system or Private
Branch Exchange (PBX). Your machine can be
connected to most types of PBX. The machine's
recall feature supports timed break recall only (TBR).
TBR will work with most PBX systems allowing you to
gain access to an outside line, or send calls to another
extension. The feature works when the Tel/R key is
pressed.