Scan To Ocr (Not Available For English Version) - Brother DCP-8060 Software User's Manual

Scan to OCR (Not available for English version)

When you choose Scan to OCR, your document will be scanned and sent directly to the PC you designated
on your network. ControlCenter2 will activate Prest! Pagemanager
text for viewing and editing from a word processing application on the designated PC. You can change the
Scan configuration. (See OCR (Word Processing program) (Not available for English version) on page 61.)
a
Put the document face up in the ADF, or face down on the scanner glass.
b
Press (Scan).
c
Press a or b to choose Scan to OCR.
Press OK.
If your machine is a MFC-8460N or DCP-8060, go to Step e.
If your machine is a MFC-8860DN, go to Step d.
d
Press a or b to choose 2sided (L)edge, 2sided (S)edge or 1sided.
Press OK.
Note
If you want to scan a document using the duplex scanning feature, you need to put the document in the
ADF and then choose 2sided (L) edge or 2sided (S) edge depending on your document layout.
e
Press a or b to choose the destination PC you want to send to.
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination PC on
the control panel.
Press OK.
The machine starts the scanning process.
®
OCR and convert your document into
4.
4
81