Network Scanning (For Models With Built-In Network Support); Before Using Network Scanning; Configuring Network Scanning - Brother DCP-8060 Software User's Manual

Network Scanning (For models with
4
built-in network support)
To use the machine as a network scanner, the machine must be configured with a TCP/IP address. You can
set or change the address settings from the control panel (See the Network User's Guide on the CD-ROM).
If you installed the machine following the instructions for a network user in the Quick Setup Guide then the
machine should already be configured for your network.

Before using Network Scanning

Configuring Network Scanning

If you need to change the machine that was registered to your PC during the installation of MFL-Pro Suite
(see the Quick Setup Guide), follow the steps below.
®
a
For Windows XP, click the Start button, Control Panel, Printers and Other Hardware, then
Scanners and Cameras (or Control Panel, Scanners and Cameras).
®
For Windows 98/Me/2000, click the Start button, Control Panel, then Scanners and Cameras.
b
Right-click the Scanner Device icon and choose Properties.
The Network Scanner Properties dialog box appears.
4
4
4
75