(Post Br-Script3 3™ Language Emulation Printer Driver); For Mac Os ® X Users - Brother DCP-8060 Software User's Manual

Using the BR-Script3
®
(Post Script
Note
• To use the BR-Script3 printer driver on a Network, see the Network User's Guide on the CD-ROM.
• To use the BR-Script3 printer driver, you need to set the Emulation to BR-Script 3 by using the control
panel before connecting the interface cable. (See Printer Emulation Support on page 110.)
• The BR-Script3 printer driver does not support the following functions:
• PC-Fax Sending
®
For Mac OS X users
You need to install the BR-Script3 printer driver using the following instructions.
Note
If you use a USB cable and Mac OS
Setup Utility (Print Center for Mac OS
Printer list, you will need to delete it and then install the BR-Script3 printer driver.
a
Choose Applications from the Go menu.
3™ language emulation printer driver)
®
, only one printer driver for a machine can be registered in Printer
®
10.2.X users). If a Brother Laser driver is already listed in the
7.
7
7
116