Brother DCP-8060 Software User's Manual page 43

Pre-Scanning to crop a portion you want to scan
The PreScan button is used to preview an image for cropping any unwanted areas from the image. When
you are satisfied with the preview, click the Start button in the Scanner Setup dialog box to scan the image.
a
Put the document face up in the ADF, or face down on the scanner glass.
1 Scanning area
b
Choose the settings for Scan (Image Type), Resolution, Scan Type, Brightness, Contrast and
Document Size, as needed.
c
Click PreScan.
The whole image is scanned into the PC and appears in the Scanning Area of the Scanner Setup dialog
box.
d
Press and hold down the left mouse button and drag it over the portion you want to scan.
1 Scanning area
1
1
2.
2
37