Using The Scan Key (For Usb Cable Users); Scan To E-Mail - Brother DCP-120C Software User's Manual

Using the Scan key (For USB cable users)

Note
If you use the Scan key on a network, see Using the Scan key on page 11-3.
You can use (Scan) on the control panel to scan documents into your word processing, graphics or
E-mail applications or a folder on your Macintosh
mouse clicks needed to scan from your Macintosh
Before you can use
and connect the machine to your Macintosh
then the correct drivers and the ControlCenter2 are installed. Scanning by
configuration on Device Button tab. (See SCAN on page 10-4.) For details about how to configure the
ControlCenter2 buttons to launch the application of your choice using
(For Mac OS® X 10.2.4 or greater) on page 10-1.

Scan to E-mail

You can scan either a black and white or colour document into your E-mail application as a file attachment.
You can change the
a
Load your document.
b
Press (Scan).
Scan to E-mail e
c
Press a or b to choose Scan to E-mail.
Press Menu/Set. (For MFC)
Press Set. (For DCP)
d
Press Mono Start or Colour Start.
The machine starts scanning the document, creates a file attachment, and launches your E-mail
application, displaying the new message waiting to be addressed.
®
(Scan) on the control panel, you have to install the Brother MFL-Pro Software Suite
®
. If you installed the MFL-Pro Suite from the included CD-ROM
(Scan) configuration. (See E-mail on page 10-7.)
. The advantage of using
®
.
(Scan), see Using ControlCenter2
Scanning
(Scan) is that you avoid the
(Scan) follows the
9 - 6