Scanning A Document Into The Pc - Brother DCP-120C Software User's Manual

Scanning a document into the PC

You can scan a whole page, or scan a portion of the page after pre-scanning the document.
Scanning a whole page
a
Load your document.
b
Adjust the following settings, if needed, in the Scanner Setup dialog box:
Image Type
Resolution
Scan Type
Brightness
Contrast
Document Size
c
Click Start.
When scanning is finished, click Cancel to return to the PaperPort
Pre-Scanning to crop a portion you want to scan
The PreScan button is used to preview an image for cropping any unwanted areas from the image. When
you are satisfied with the preview, click the Start button in the Scanner Setup dialog box to scan the image.
a
Load your document.
b
Choose the settings for Image Type, Resolution, Scan Type, Brightness, Contrast and
Document Size, as needed.
c
Click PreScan.
The whole image is scanned into the PC and appears in the Scanning Area (1) of the Scanner Setup
dialog box.
®
9.0SE window.
1
Scanning
2 - 3