Settings In The Scanner Setup Dialog Box - Brother DCP-120C Software User's Manual

d
Press and hold down the left mouse button and drag it over the portion you want to scan.
Note
You can enlarge the image using the
original size.
e
Load your document again.
Note
Skip this step if you loaded the document on the scanner glass in a.
f
Click Start.
This time only the chosen area of the document appears in the PaperPort
application window).
g ®
In the PaperPort 9.0SE window, use the options available to refine the image.

Settings in the Scanner Setup dialog box

Image Type
Choose the output image type from Photo, Web or Text. Resolution and Scan Type will be altered for each
default setting.
The default settings are listed in the table below:
Image Type
Photo Use for scanning photo images.
Web Use for attaching the scanned image to web pages. 100 × 100 dpi
Text Use for scanning text documents.
icon, and then use the
Resolution
300 × 300 dpi
200 × 200 dpi
icon to restore the image to its
®
9.0SE window (or your
Scan Type
24-bit colour
24-bit colour
Black & White
Scanning
2 - 4