User-Defined Button; Custom Scan - Brother DCP-120C Software User's Manual

CUSTOM SCAN

There are four buttons which you can configure to fit your scanning needs.
To configure a button, click the button while holding down the Ctrl key, and the configuration window appears.
There are four scan functions: Scan to Image, Scan to OCR, Scan to E-mail and Scan to File.
Scan to Image
Allows you to scan a page directly into any image viewer/editor software. You can choose any image editor
application on your Macintosh
Scan to OCR
Converts scanned documents into editable text files. You can choose the destination application for the
ebitable text. You must install Presto!
Scan to E-mail
Attaches the scanned images to an E-mail messages. You can choose any E-mail application on your
system. You can also choose the file attachment type and create a quick send list of E-mail addresses
chosen from your E-mail address book.
Scan to File
Allows you to save a scanned image to any folder on a local or network hard disk. You can also choose
the file type to be used.

User-defined button

To configure a button, click the button while holding down the Ctrl key, and the configuration window appears.
Follow these guidelines for button configuration.
®
as a destination.
® ®
PageManager for this feature.
ControlCenter2
10 - 9