Scan To Image - Brother DCP-120C Software User's Manual

Scan to Image

When you choose Scan to Image, your document will be scanned and sent directly to the PC you designated
on your network. ControlCenter2 will activate the default graphics application on the designated PC. You can
change the Scan configuration. (See Image (example: Microsoft Paint) on page 3-5.)
a
Load your document.
b
Press (Scan).
c
Press a or b to choose Scan to Image.
Scan to Image
Press Menu/Set. (For MFC)
Press Set. (For DCP)
d
Press a or b to choose the destination PC you want to send to.
Press Menu/Set. (For MFC)
Press Set. (For DCP)
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination PC on
the control panel.
e
Press Mono Start or Colour Start.
The machine starts the scanning process.
e
Network Scanning (For models with network support as standard)
4 - 5