Using the Scan key
Scan to E-mail (PC)
When you choose Scan to E-mail (PC) your document will be scanned and sent directly to the PC you
designated on your network. ControlCenter2 will activate the default E-mail application on the designated PC.
You can scan and send a black and white or colour document from the PC as an attachment.
You can change the
a
Load your document.
b
Press
(Scan).
c
Press a or b to choose Scan to E-mail.
Scan to E-mail e
Press Menu/Set. (For MFC)
Press Set. (For DCP)
d
Press a or b to choose the destination PC you want to use for E-mailing your document.
Press Menu/Set. (For MFC)
Press Set. (For DCP)
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination PC on
the control panel.
e
Press Mono Start or Colour Start.
The machine starts the scanning process.
(Scan) configuration. (See E-mail on page 3-8.)
Network Scanning (For models with network support as standard)
4 - 4