Exmark Radius X Series Operator's Manual page 42

Maintenance
4. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
Note: Torque the plug to 14 N-m (125 in-lb).
5. Change the engine oil filter. Apply a thin film of
clean Exmark 4-Cycle Premium Engine Oil to the
rubber gasket on the new filter.
Figure 29
Note: Ensure the oil filter gasket touches the
engine, then an extra 3/4 turn is completed.
Note: Dispose of the used oil at a recycling
g027734
center.
6. Slowly pour approximately 80% of the specified
oil into the filler tube—use oil recommended
in the Checking the Engine Oil–Kawasaki
Engine section.
42
Figure 30
g027477