Exmark Radius X Series Operator's Manual page 15

E-Series:
Deck Size
Quantity 2
Tread Super Turf
Size 22 x 8.50-12
Ply Rating 4
Pressure 13 psi (90 kPa)
E-Series:
Deck Size
Quantity
Tread
Size
Ply Rating
Pressure
Front Caster — All Models
Deck Size
Quantity 2
Tread Smooth
Size 13 x 5.00-6
Ply Rating 4
Pressure 13 psi (90 kPa)
Cutting Deck
• Cutting Width:
– 44 inch Deck: (111.8 cm)
– 48 inch Deck: (121.9 cm)
– 52 inch Deck: (132.1 cm)
– 60 inch Deck: (152.4 cm)
• Discharge:
– Side Discharge: Non "R" models
– Rear Discharge: "R" models
• Blade Size:
Drive
Pneumatic (Air filled)
44 48 & 52
2
Super Turf
22 x 9.50-12
4
13 psi (90 kPa)
Drive
Pneumatic (Air filled)
60
2
Super Turf
22 x 10.50-12
4
13 psi (90 kPa)
Pneumatic (Air filled)
44 48, 52, & 60
2
Smooth
13 x 6.50-6
4
13 psi (90 kPa)
– 44 inch Deck: 22.25 inches (56.5 cm) – (2 ea.)
– 48 inch Deck: 24.50 inches (62.2 cm) – (2 ea.)
– 48 inch Deck: 16.25 inches (41.3 cm) – (3 ea.)
– 52 inch Deck: 18.00 inches (45.7 cm) – (3 ea.)
– 60 inch Deck: 20.50 inches (52.1 cm) – (3 ea.)
• Blade Spindles:
– X-Series: Solid steel spindles with .98 inch (25
mm) I.D. bearings.
– S- and E-Series: Solid steel spindles with .67
inch (17 mm) I.D. bearings.
• Deck Drive: "B" Section belt with self-tensioning
idler.
• Electric clutch:
– 44 Inch Decks: 118 ft-lb
– 48 & 52 Inch Decks: 125 ft-lb Mag Stop
– 60 Inch Deck: 125 ft-lb Neo-Mag Stop
• Deck:
– 44 inch Deck: 1 anti-scalp roller
– 48 inch Deck: 3 anti-scalp rollers
– 52 inch Deck: 5 anti-scalp rollers
– 60 inch Deck: 5 anti-scalp rollers
– 60 inch Deck-Rear Discharge:
4 anti-scalp rollers
– Side Discharge: Full floating deck is attached
to out-front support frame. Anti-scalp rollers
provide maximum turf protection. Deck
design allows for bagging, mulching or side
discharge.
– Rear Discharge: Full floating deck is attached
to out-front support frame. Anti-scalp rollers
and side bumpers provide maximum turf
protection. Deck design allows for rear
discharge or finish cut (reduced discharge).
• Deck Depth:
– S- and E-Series:
◊ Side Discharge: 5.0 inches (12.7 cm)
◊ Rear Discharge: 5.5 inches (14.0 cm)
– X-Series:
All Decks: 5.5 inches (14.0 cm)
• Cutting Height Adjustment:
Foot activated lever is used to adjust the cutting
height from 1 1/2 inch (3.8 cm) to 5 inches (12.7
cm) in 1/4 inch (6.4 mm) increments.
• Mulching Kit: Optional.
15
Specifications