Table of Contents
Advertisement
2. Press the Menu Select button directly below Logf.
Result: One of the following results occur:
●
The display shows Pswd enabled, indicating that the radio lock feature is enabled.
●
The display shows Pswd disabled, indicating that the radio lock feature is disabled.
7.17.2
Changing the Radio Lock Password
Procedure:
1.
or
to Pswd.
2. Press the Menu Select button directly below Pswd.
The display shows Change Password screen.
3.
or
to Unlock Pswd.
4. Press the Menu Select button directly below Sel .
5. Enter the old password.
6. Press the Menu Select button directly below Ok .
7. Enter the new password.
8. Press the Menu Select button directly below Ok .
9. Re-enter the new password.
10. Press the Menu Select button directly below Ok .
Result:
The password is updated.
If the two passwords do not match, repeat
NOTE: If you enter three incorrect old passwords, the radio exits the password feature. You cannot
access this feature again until you turn the radio off and on.
7.17.3
Changing the Tactical Inhibit Password
The Tactical Inhibit Password is required for the Radio Stun and Radio Kill features. You can set up to eight
characters for this password.
Procedure:
1.
or
to Pswd.
2. Press the Menu Select button directly below Pswd.
The display shows Change Password screen.
3.
or
to Tactical Inh Encode Pswd.
4. Press the Menu Select button directly below Sel .
5. Enter the old password.
6. Press the Menu Select button directly below Ok .
7. Enter the new password.
step 5
through
step
10.
MN001824A01-AT
Chapter 7: Advanced Features
95
Advertisement
Table of Contents
