FujiFilm CX 3240 User Manual page 67

Altitude Adjustment
Specify the altitude of the location where the printer is installed.
Color Calibration - Automatic
Corrects the consistency of printing colors over time, environment, and print media.
Density Calibration- Automatic
See "Advanced Color Calibration - Automatic" (P.145).
Color Registration
Adjusts the color registration.
Image Position
Adjust the image position.
Paper Blocking Prevention
See "Paper Blocking Prevention" (P.152).
Non-Fujifilm Toner Cartridge
Enable or disable the non-genuine toner mode.
Developer & Transfer Roller Cleaning
See "Performing a Developer and Transfer Roller Cleaning Procedure" (P.149).
Fusing Unit Temperature Adjustment
Adjust the temperature of the fusing unit.
To lower the temperature, set negative values. To increase, set positive values.
The default settings may not give the best output on all paper types. When the printed
paper has curled, try to lower the temperature. When the toner does not fuse on the
paper properly, try to increase the temperature.
Note
The print quality changes depending on the setting values you select for this item.

Fusing Unit Speed Adjustment
See "Fusing Unit Speed Adjustment" (P.150).
Transfer Voltage Adjustment
Adjust the transfer voltage.
To lower the voltage, set negative values. To increase, set positive values.
The default settings may not give the best output on all paper types. If you see mottles
on the print output, try to increase the voltage. If you see white spots on the print
output, try to decrease the voltage.
Note
The print quality changes depending on the setting values you select for this item.

Adjust Density
See "Adjusting the Density" (P.151).
Device App
6
67