Adjusting Paper Registration - FujiFilm CX 3240 User Manual

Maintenance
2
Touch [Device] > [Support] > [Advanced Color Calibration - Automatic].
3
Touch [Start] to run Color Calibration automatically.
4
At the successfully completed prompt, touch [Close].
5
To exit the menu, touch [X].
6
Press the Home button.

Adjusting Paper Registration

Use Adjust Paper Registration to adjust the placement of the printed image on the
page. The adjustment allows you to place the top, bottom, left, and right margins
exactly where you want. You can specify the image position on both the front and back
sides of the paper, for each installed paper tray.
Note
Verifying Paper Registration
1
Press the Home button.
2
Touch [Device] > [Support] > [Image Position].
3
Select the source paper tray for the registration print.
1) Touch [Paper Supply].
2) Touch the desired tray.
4
If your printer has automatic 2-sided printing, select the sides that you want to
optimize.
10


5
Specify the consecutive number of sample pages to print.
1) Touch [Print Settings].
2) To increase or decrease the number of sample pages, for Quantity, touch the Plus
6
To print the sample pages, touch [Print Sample].
7
When printing is completed, touch [Close].
146
Depending on the printer settings, you may need to log in as the system administrator.

To select a sample registration page for adjusting side 1, touch [Side to Adjust], then
touch [Side 1].
To select a sample registration page for adjusting both sides, touch [Side to Adjust],
then touch [Side 2].
icon (+) or the Minus icon (-), then touch [OK].