Panasonic SC-HC25GS Service Manual page 79

Step 5 : Remove SMPS Shield Plate.
Step 6 : Use a tape to keep the close switch (S643) depressed.
Step 7 : Place the Support Block to support the Front Cabinet
Assembly as shown.
Step 8 : Connect 8P FFC at the connector (CN303) on Main
P.C.B..
Step 9 : Connect 6P wire at the connector (CN905) on SMPS
P.C.B..
Step 10 : Check & repair SMPS P.C.B. according to the dia-
gram shown.
79