Table of Contents
Advertisement
Step 7 : Upset the Docking Tub Unit.
Step 8 : Release the shield wire from the slot.
Caution : During assembling, ensure shield wire is fixed
into the slot.
Step 9 : Detach 5P shield wire at the connector (CN1002) on
iPhone P.C.B..
Step 10 : Remove Docking Tub Unit.
8.25.1. Disassembly of iPhone P.C.B.
• Refer to "Disassembly of Docking Tub Unit"
Step 1 : Remove 2 screws.
Step 2 : Lift up Tub Cover as arrow (1) and (2) shown to
remove it.
66
Advertisement
Table of Contents
