Table of Contents
Advertisement
6.4.
Sales Demonstration Lock Function Mode
6.4.1.
Entering into sales Demo Mode
Here is the procedures to enter into Sales Demonstration Lock.
Step 1 : Turn on the unit.
Step 2 : Select to any mode function, press and hold [
sec.
Step 3 : The display will show upon entering into this mode.
Note :
button is invalid and the main unit displays "LOCKED" while the lock function mode is entered.
6.4.2.
Cancellation
Step 1 : To cancel only can be triggered in CD Mode and Volume 19.
Step 2 : Press and hold [
Step 3 : The display will show after exit from this mode.
] key and follow by [
24
] key and follow by [
] key. It must be pressed within 0.5 sec.
] key. It must be pressed within 0.5
Advertisement
Table of Contents
