8.22. Disassembly of SMPS P.C.B.
• Refer to "Disassembly of Net Frame Assembly"
• Refer to "Disassembly of Base Stand Assembly"
• Refer to "Disassembly of Docking Lid"
• Refer to "Disassembly of Front Cabinet Assembly"
Step 1 : Remove 1 screw.
Step 2 : Remove 3 screws.
Step 3 : Lift up Himelons.
Caution : Replace the Himelons if they are torn during dis-
assembling.
Step 4 : Lift up SMPS Assembly as shown.
Step 5 : Detach 6P wire at the connector (CN905) on SMPS
P.C.B..
Step 6 : Remove SMPS Assembly.
Step 7 : Lift up Himelons.
Caution : Replace the Himelons if they are torn during dis-
assembling.
59