Jøtul F 500 ECO IT Installation And Operating Instructions Manual page 15

Fig. 19c
2. Edge the rear burn plate out of the stove.
3. When refi tting, follow the same procedure in reverse order.
(fi rst see fi g. 21 (insulation mats))
Fig. 20 Replacing the insulation mats
A
4. Behind the rear burn plate there are 5 insulation mats. They
must be replaced when replacing the rear burn plate. Lay
the new rear burn plate on a suitable surface and place the
insulation mats as shown in the fi gure. NB: It is important
that the insulation mats are placed according to the fi gure,
as there are diff erent thickness of the mats. Insulation mat
A = 19mm thick (2 pieces), B = 25mm thick (3 pieces).
B
Fig. 21 Replacing the side burn plate (Right)
1. Loosen the screw and the washer that holds the side burn
plate (A) and the insulation mat (B) in place.
2. Edge the side burn plate and the insulation mat out of the
stove.
3. When refi tting, follow the same procedure in reverse order.
Fig. 22 Replacing the side burn plate on the side door
B
A
1. Open the side door.
2. Loosen the screw and the washer that holds the burn plate
(A) and the insulation mat (B) on place.
3. Remove the burn plate and the insulation mat from the
side door.
4. When refi tting, follow the same procedure in reverse order.
ENGLISH
B
A
15