Page 1
Jotul F 500 Oslo Woodstove ........Installation and Operating Instructions for USA Installation et fonctionnement pour Canada .
Page 2
TABLE OF CONTENTS: Standards and Safety Notices Installations Chimney Requirements Connecting to the Chimney Clearances Alcove Installations Mobile Home Installations Operation Maintenance Accessories Parts Diagram Appendix A...
Page 3
NOTICES · · · · · Standards for Chimneys, Fireplaces, Vents · and Solid Fuel Burning Appliances , Installation Code for Solid-Fuel-Burning Appliances and · Equipment.
Page 6
Standard for Chimneys, Fireplaces, Vents and Solid Fuel Burning Appliances...
Page 7
Installation Code for Solid Fuel Burning Appliances and Equipment...
Page 9
HEARTH PROTECTION Standard for Chimneys, Fireplaces, Vents and Solid Fuel Burning Appliances...
Page 10
Installation Code for Solid-Fuel Burning Appliances and Equipment NO OTHER HEAT SHIELD MAY BE USED. NOTICE Accessories for woodstoves for clearance reduction have been developed by many manufacturers. If not following the methods of the installation codes, be sure that any accessory you choose has been tested by an independent laboratory and carries the laboratorys testing mark.
Page 11
OSLO F500 WOODSTOVE CLEARANCES UNPROTECTED SURFACE PROTECTED WALL ( PER NFPA 211) PARALLEL TO THE WALL PARALLEL TO THE WALL IMPORTANT: CONNECTOR HEATSHIELDS AND DOUBLE WALL PIPE MUST BE A LISTEDPRODUCT. ALWAYS FOLLOW THE MANUFACTURES INSTRUCTIONS. PROTECTED SURFACE UNPROTECTED SURFACE (PER NFPA 211) CORNER INSTALLATION CORNER INSTALLATION...
Page 13
° EVER BUILD OR ALLOW THE FIRE TO REST DIRECTLY ON THE GLASS HE LOGS SHOULD ALWAYS BE SPACED AT LEAST ONE INCH FROM THE GLASS TO ALLOW FOR ° PROPER AIR FLOW WITHIN THE STOVE ° °...
Page 14
· · · · · · · ° ° ° ° STOVE TOP STOVE TOP THERMOMETER THERMOMETER...
Page 16
· · · Outside Air Kit Description Order # Size Length...
Page 17
Installation will require some additional materials: Stove-Top Thermometer ° °.
Page 19
APPENDIX A: PARTS LIST FOR THE OSLO F500 1.231 optional equipment MINIMUM INSULATING R VALUE OF 0.5. ALCOVE INSTALLATION REQUIRE A MINIMUM R VALUE OF 1.6. (IF A UL/ULC or WHI LISTED HEARTH PAD IS NOT USED.)