Jøtul F 500 ECO IT Installation And Operating Instructions Manual page 14

ENGLISH
Fig. 18b Replacing the exhaust defl ector
2. Loosen the screw (A) that holds the topplate in place. This must
be done from the inside of the burnchamber.
Fig. 18c Replacing the exhaust defl ector
3. Lift the top, turn it 180 degrees and place it on a fl at underlay.
NB: It is important that the underlay is soft, so that the surface
is not damaged.
Fig. 18d Replacing the exhaust defl ector
4. Loose the 4 screws that secures the exhaust defl ector to the
top.
5. When refi tting, follow the same procedure in reverse order.
14
7.3 Replacing the burn plates
Fig. 19a Replacing the rear burn plate
A
1. Loosen the rear burn plate by unscrewing the screws as shown
Fig. 19b
in the fi gure. The screws are continuous and have nuts on the
back of the stove. (see fi g.19b)