Cleaning Coils; Removing Scratches From Bumper - Hussmann GSVM Installation & Service Manual

M
4-4
AINTENANCE

CLEANING COILS

Condenser coils should be cleaned at least once
per month. Additional cleaning may be needed
depending on the operational environment. A
dirty condenser blocks normal airflow through
the coils.
Airflow blockage increases energy consump-
tion and reduces the merchandiser's ability to
maintain operating temperature.
To clean the coils, use a vacuum cleaner with a
wand attachment and a soft (non-metallic)
brush to remove dirt and debris. Do not bend
coil fins. Always wear gloves and protective eye
wear when cleaning near sharp coil fins and
dust particles.
P/N 0515275_F
SHUT FANS OFF DURING

REMOVING SCRATCHES FROM BUMPER

Most scratches and dings can be removed
using the following procedure.
1. Use steel wool to smooth out the surface
area of the bumper.
2. Clean area.
3. Apply vinyl or car wax and polish surface
for a smooth glossy finish.
U.S. & Canada 1-800-922-1919 • Mexico 01 800-890-2900 • www.hussmann.com
CLEANING PROCESS.