Hussmann GSVM Installation & Service Manual page 33

P/N 0515275_F
Shelf end Trim Kit — Consists of four painted
steel ends for the standard 13 in. and 15 in.
shelves. This trim conceals and protects the
exposed ends of the shelves. The trim kit
attaches by two snap fasteners supplied with
each trim piece for the GSVM-4060 model.
High Humidity Condensate Pan — (For
GSVM-4072 & 5272) This is a 1,000 watt, 9
Amp. pan with a 6 ft - 9 in. 115V power cord
attached. A dedicated circuit is required.
Shelf Upslope Tilt Adapter Kit — This kit con-
sists of four zinc coated wire adapters to
increase the two standard shelves, upslope
from 1 1/2º to 6º.
Price Tag Molding Kit — This kit consists of
aluminum price tag molding for the standard
shelves. Price tag moulding will hold both 1 in.
and 1.235 in. standard price tags. (Note that
the standard shelves accept 1.235 in. tags.)
Wire Product Stop Kit — This kit consists of a
2 in. high chrome plated open wire stops for
the standard shelf. This stop is mounted under
tension and should not be confused with the
wire front in the partition kit.
Wire Partition Kit — This is a free-standing
wire system, which attaches to the standard
shelves, and consists of a wire front, (different
from the product stop) two wire sides and two
partitions from the front to back, all chrome
plated and 3 inches high.
Wire Cross Divider — This is a 3 inches high
and 4 inch-long divider that could be ordered
to be used with the wire partition kit above.
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Wire Basket Kits — One kit is available to
replace the top 13 in. shelf or shelves, another
is available to replace the bottom 15 in. shelf.
Each kit consists of a wire basket, two brackets,
and two dividers, which could also be used as
ends. These parts are zinc plated. The baskets
have an 8 in. high back and a 4 in sloped front.
Wire Basket Dividers — These are additional
dividers, which can be with the wire baskets kit
to obtain additional partitioned areas in the
baskets.
Additional Lighted Shelf — This consists of an
additional 13 in. lighted shelf that can be
positioned between the two standard shelves. It
is the same construction as the top standard
13 in. shelf.
LED Lights — LED light fixtures replace
fluorscent lights. This technology saves energy
and extends component life.
Night Curtain — Night curtains cover the
throat opening of the case and is installed on
the case after normal business hours. Night
curtains help reduce energy costs, allowing the
refrigeration system to work less when the case
is not in use. The night curtain for GSVM is
standard for model 5272 and is an optional kit
for models 4060 and 4072.
GSVM Open Vertical Merchandisers
5-5