Table of Contents
Advertisement
1.1 PURPOSES AND CONTENTS OF THE MANUAL
This manual provides the required information as for the installation, operation and maintenance of SHIMANTO units.
It is addressed to the machine's operators enabling them to use the equipment efficiently, even if without having any
previous specific knowledge of the apparatus.
This manual describes the characteristics of the equipment when it is being put on the market; therefore, it may not
capture later technological improvements introduced by the company as part of its constant endeavour to enhance the
performance, ergonomics, safety and functionality of its products.
The company, therefore, is not constrained to update the manuals for previous versions of machines.
It's recommended that to the user to follow the instructions contained in this booklet, especially those concerning the
safety and routine maintenance.
1.1.1 Conservation of the manual
The manual has to be always kept as reference of the appliance. It has to be stored in a safe place, away from the
dust and moisture. It has to be accessible to all users who shall consult it any time they are in doubt on how to operate
the equipment.
The company reserves the right to modify its products and related manuals without necessarily updating previous
versions of the reference material. It assumes no responsibility for any inaccuracies in the manual, if due to printing
or transcription.
The customer shall store any updated copy of the manual or parts of it delivered by the manufacturer as an attachment
to this manual.
The company is available to give any detailed information about this manual and to provide information regarding the
use and the maintenance of its own appliances.
1.1.2 Graphic symbols used in the manual
Indicates operations that can be dangerous for people and/or disrupt the correct operation of the
equipment.
ATTENZIONE
Indicates prohibited operations.
Indicates important information that the operator has to follow in order to guarantee the correct operation
of the equipment in complete safety. It indicates also general notes.
1.2 SAFETY LAWS
SHIMANTO units have been designed in compliance with the following Directives and
Harmonised Norms:
• Community Directives: 2014/30/UE, 2014/35/UE;
• Norms: EMC 2004/108/EC; IEC 60335-2-21; IEC 60335-2-40; EN 55014-1; EN 61000-3-2; EN
61000-3-11.
1.3 PERMITTED USE
The company excludes any contractual and no-contractual liability for damages caused to persons, animals or
things, by incorrect installation, adjustment and maintenance, improper use or a partial or superficial reading of the
informations contained in this manual.
These units have been designed for water heating. A different application, unless expressly authorized by the
manufacturer, is to be considered improper and therefore not allowed.
The location and the hydraulic and electric plant should be determined by the system designer and must take into
account both the purely technical needs as any applicable local legislations and specific authorizations.
The execution of all work must be performed by qualified and experienced personnel, competent in the existing rules
in different countries.
8
Advertisement
Table of Contents
